According to DIN 912-12.9 The values apply to screws with a preservative. If there is a possibility of settling, the screws should be secured against rotation. It must be ensured that the adjacent construction has adequate strength. See VDI Guideline 2230.
K3
M8
According to DIN 912-12.9 The values apply to screws with a preservative. If there is a possibility of settling, the screws should be secured against rotation. It must be ensured that the adjacent construction has adequate strength. See VDI Guideline 2230.
Lw
30 mm
t
22 mm
m
7,5 kg
Mass
C
465000 N
C0
345000 N
DIN 3 405-AM8x1
Funnel type lubrication nipple If the lubrication nipple is replaced by a tube or hose connector, the maximum screw length cannot be more than 6mm.
Hole connectors on both sides for either funnel type lubrication nipples to DIN 3405-D6 (supplied loose) or pipe or tube connections. Close off holes with lubrication nipples if no lubrication connectors are to be used.