Pneumatic Pressure Switch Model: MP20/MP25

Port size

F1:PT 1/8, F2:NPT 1/8, F3:G 1/8

Rated pressure range

Compound: 100.0~100.0 kPa

Vacuum: 0.0 ~ 101.3 kPa

Positive: 0.00 ~ 1.00 MPa

Operating / Setting pressure range

Compound: 100.0~100.0 kPa

Vacuum: 10.0 ~ 101.3 kPa

Positive: 0.10 ~ 1.00 MPa

Medium

Air, Non-corrosive gases ,incombustible gases

Proof pressure

3 times of rated pressure range (Compound, vacuum)1.5 times of rated pressure range (Positive)

Power supply voltage

12 to 24VDC ±10%, Ripple (P-P) 10% or less

Response time

2.5ms (chattering-proof function: 24ms, 192ms and 768ms selections)

Switch output

NPN or PNP open collector 2 outputs Max. load current: 80mAMax. supply voltage: 30VDC Residual voltage: 1V (load current 80mA )

Repeatability (Switch output)

± 0.2% F.S. ± 1 digit

Current consumption

55mA

Output short circuit protection

Yes

7 segment LCD display

3 1/2 digit LED display (Sampling rate: 5 times/1sec.)

Indicator accuracy

±2% F.S. ±1 digit (ambient temperature: 25 ±3)

Indicator

Green LED (OUT1) Red LED (OUT2)

Enclosure

MP20:IP40MP25:IP65

Ambient temp. Range

Operation: 0 ~ 50,storage:-20 ~ 60 ( No condensation or freezing)

Ambient humidity range

Operation/Storage: 35 ~ 85% RH ( No condensation)

Withstand voltage

1000VAC in 1-min (between case and lead wire)

Insulation resistance

50Mohm min. (at 500VDC M, between case and lead wire)

Vibration

Total amplitude 1.5mm,10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X,Y and Z

Shock

980m/s2 (100G),3 times each in direction of X,Y and Z

Temperature characteristic

2% F.S. of detected pressure (25) at temp. Range of 0~50

Lead wire

Oil-resistance cable(0.15mm2)

Weight

Appro 105g(with 2-meter le